PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Service Manual DF40, DF50 Fuel Injector [107][Df40, Df50]

Related Products:
Service Manual DF40, DF50 Fuel Injector [107][Df40, Df50]
99500-87J08-01E
Suzuki Marine

FUEL INJECTOR

INSPECTION

  1. Using sound scope or equivelent, check operating sound of fuel injector when engine is running or cranking.
    The injector operating sound cycle should vary according to engine speed.
    If no sound or an unusual sound is heard, check injector circuit (wire or connector) or injector.
  2. Disconnect lead wire connector from fuel injector.
  3. Connect digital tester between terminals of injector and check resistance.

09930-99320 : Digital tester
Tester range : Ω (Resistance)

Fuel injector resistance : 11.0 – 16.5 Ω
If out of specification, replace fuel injector.

  1. Connect lead wire connector to fuel injector securely.

REMOVAL

  1. Relieve fuel pressure according to procedure described on page 5-2.

  2. Disconnect lead wire connectors from each injector.

  3. Remove the screw securing the fuel injector stopper.

  4. Remove fuel injector stopper and fuel injector.

A small amount of fuel may be released when the fuel injector is removed from intake manifold. Place a shop cloth under fuel injector before removal to absorb any fuel released. Dispose of fuel soaked cloth in appropriate container.

Share on social:

Related Products