PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Service Manual DF40, DF50 Fuel Injection Control System [54][Df40, Df50]

Related Products:
Service Manual DF40, DF50 Fuel Injection Control System [54][Df40, Df50]
99500-87J08-01E
Suzuki Marine

ELECTRONIC FUEL INJECTION SYSTEM

The fuel injection system used by the DF40/50 is a speed-density, multi-point, sequential, electronic fuel injection type. The fuel injection system is composed of the fuel line components, air intake components , and components for system control (ECM,sensors, switches, etc.).

FUEL INJECTION CONTROL SYSTEM

FUEL INJECTION CONTROL SYSTEM

OUTLINE

The sensors monitor current engine condition and send signals to the ECM. Based on these signals, the ECM determines the optimum fuel injection time duration (fuel amount) and fuel injection timing (multi point sequential timing) and controls the injector operating signals accordingly.
Fuel injection start timing is set at BTDC 545° on exhaust stroke constant.

FUEL INJECTION TIMING CHART

CONTROL MODE

BEFORE START :

When the ignition switch is turned “ON”, the ECM receives a MAP sensor signal, indicating the static barometric pressure of the intake manifold, which is used to compensate the fuel injection map for altitude.

WHEN CRANKING :
Fuel is simultaneously injected to all cylinders every time any piston is positioned at compression stroke.

AFTER START (FAST-IDLE FUNCTION):
The fuel injection amount is controlled to increase until the timer, set according to cylinder temperature at the time of engine start, expires.

WHEN IDLING / TROLLING :
The fuel injection amount is controlled to maintain a stable engine speed at the specified idle / trolling rpm.

WHEN ACCELERATING :
The fuel injection amount is controlled to increase.

WHEN DECELERATING :
The fuel injection amount is controlled to decrease.
The fuel injection is also cut off on very rapid engine deceleration.

Share on social:

Related Products