ENGINE SERIAL NUMBER

The engine serial number starts from the following six-figure number located after the model pre-fix.
PERIODIC MAINTENANCE
IDLE SPEED
Inspect initially after 20 hours (1 month) and every
200 hours (12 months).

Change the idle speed adjustment procedure as following:
The idle adjustment of 2008 model can be performed by fixing duty of IAC valve as well as DF150 – 250 model.
• Before checking idle speed, the engine should be allowed to warm up.
• Check and/or adjust idle speed after engine speed has stabilized.

Remove the bolt and No.1 ignition coil.
Connect special tool between No.1 ignition coil and spark plug.
TOOL 09930-88720 : H · T cord with plug cap adapter
Start engine and allow to warm up.
Attach engine tachometer to the ignition H. · T cord.
TOOL 09900-26006 : Engine tachometer
- Check engine speed .
Idle speed (no load): 800 – 900 r/min
