DISASSEMBLY

For correct assembly, scribe an alignment mark on each part of fuel pump.

Remove six screws (1) and remove in sequence the outer plate (2), diaphragm (3) and valve body (4).
Turn piston (6) until pin (5) comes out through cutaway of pump body (10).
Remove following parts :
- Pin (5)
- Piston (6)
- Spring (7)
- Diaphragm (8)
- Spring (9)
ASSEMBLY

Assembly is reverse order of disassembly with special attention the following steps.
After connecting diaphragm rod 8 to piston 6 with pin 5, align
the six diaphragm holes to pump body holes by turning piston 6 and diaphragm 8 together. Turning them together prevents the pin from coming out through pump body 0 cutaway
