PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Service Manual DF40, DF50 Cylinder Head Assembly [136][Df40, Df50]

Related Products:
Service Manual DF40, DF50 Cylinder Head Assembly [136][Df40, Df50]
99500-87J08-01E
Suzuki Marine

CYLINDER HEAD ASSEMBLY

REMOVAL

(Cylinder head / valve / camshaft)

Prior to removing cylinder head :

  • Remove the power unit. (see page 6-3 to 6-6)

  • Remove the timing chain. (see page 6-15 to 6-16)

  1. Remove the bolts securing the camshaft housing to cylinder head, then remove each camshaft housing.

For ease of assembly, note position of each individual camshaft housing.

  1. Remove intake and exhaust camshafts.

  1. Loosen ten (10) cylinder head bolts in the order indicated in figure and remove them.

  2. Remove cylinder head assembly and head gasket.

Use a special tool (10mm deep socket wrench) when loosening the cylinder head bolts.

TOOL 09919-16010 : Deep socket wrench (10 mm)

INSTALLATION

Installation is reverse order of removal with special attention to the following steps.

Do not re-use gasket. Always use a new gasket.

  1. Insert the dowel pins and place a new cylinder head gasket into position on the cylinder.
Share on social:

Related Products