ENGINE CONTROL MODULE (ECM)
The ECM sends signals to control the actuators based on the information inputs from each sensor / switch. Major controls are as follows:
| NAME OF CONTROL | DESCRIPTION |
|---|---|
| Fuel injection control | • Controls fuel injection amount and timing |
| Ignition control | • Controls ignition timing. |
| Idle air control | • Controls idling/trolling speed by adjusting intake air amount through IAC valve |
| Fuel pump control | • Controls high pressure fuel pump drive. |
| Caution system control | • Informs operator of abnormal engine condition • Controls engine speed |
| Self-diagnostic system control | • Informs operator of sensor / switch malfunction. |
| Fail-safe system control | • Allows operation during sensor/ switch malfunction |
| Operating hour indication system control | • Informs operator of total operating time in units of 50 hours. |
| Start-in-gear protocol system control | • Prevents engine start when shift is positioned in forward or reverse. |
| O₂ feedback system control | • Controls and performs O2 feedback operation using optional O₂ sensor. |
The information related to the Caution system, Self-Diagnostic System, Operating hour indication system and O₂ feedback system are retained in ECM memory.
