Engine speed control during shifting
On QH-specification models, a special safety feature to control engine speed during shifting has been added. This feature fixes the upper limit of engine speed during shifting to a preset value of 1500 r/min.
[ Operation ]
If the CTP switch is “OFF” and engine speed at the moment of shifting (neutral switch turns “OFF”) is above the rpm limit of 1500 r/min, engine speed will automatically be lowered to approximately 1500 r/min.
Once this feature is engaged, engine speed will be regulated to remain at the fixed 1500 r/min limit until the feature is can celled.
[ Cancellation ]
The engine speed control feature will be canceled if any one of the following conditions is satisfied:
• Throttle is returned to and remains at full close (CTP switch “ON”) for at least one second.
• Engine speed is lowered below the control speed (1500 r/min) and remains there for at least for two seconds.
