PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Service Manual DF40, DF50 Assembly [130][Df40, Df50]

Related Products:
Service Manual DF40, DF50 Assembly [130][Df40, Df50]
99500-87J08-01E
Suzuki Marine

ASSEMBLY

(1) Wash, clean and then dry all disassembled parts.

(2) Apply thin coat of engine oil to inner and outer rotors, oil seal lip and inside surfaces of oil pump case and plate.

(3) Install outer and inner rotor to pump case.

(4) Install outer plate.

Tighten six (6) screws securely.

After mounting the outer plate, check to be sure that each rotor turns smoothly by hand.

INSTALLATION

Installation is reverse of removal with special attention to following steps.

  1. Check for proper timing chain installation. (see page 6-20)

  2. Install two (2) dowel pins to cylinder block.

Before fitting the pump case, oil the oil seal lip.

Share on social:

Related Products