Maintenance and Tune-Up
Precautions
Precautions for Maintenance
The “Periodic Maintenance Schedule Chart” lists the recommended intervals for all the required periodic service work necessary to keep the motor operating at peak performance and economy.
Maintenance intervals should be judged by number of hours or months, whichever comes first.
More frequent servicing should be performed on outboard motors that are used under severe conditions.
General Description
Recommended Oil and Lubricants
Refer to “Fuel and Oil Recommendations" in Section 0A (Page 0A-4).
Scheduled Maintenance
Periodic Maintenance Schedule Chart
I = Inspect and clean, adjust, lubricate or replace, if necessary
T = Tighten
R = Replace

Lubrication Point
Proper lubrication is important for the safe, smooth operation and long life of each working part of the outboard motor.
Apply Suzuki Water Resistant Grease to the following point.
Lubricate
Initially after 20 hours (1 month) and every 100 hours (12 months)
Grease 99000—25350 (SUZUKI Water Resistant Grease EP2 (250 g))

- Shift linkage
- Grease nipple, swivel bracket
- Grease nipple, steering bracket
- Trim ram pad
- Propeller shaft
