PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Service Manual 5009011_200–300 HP 90°V Models AA Gearcase [Gearcase Disassembly 2]

Related Products:
Service Manual 5009011_200–300 HP 90°V Models AA Gearcase [Gearcase Disassembly 2]
5009011
BRP Marine

GEARCASE DISASSEMBLY

GEARCASE DISASSEMBLY

IMPORTANT: Counter rotation (CR) gearcases use unique components and require different service procedures. Use care when working on counter rotation gearcases. DO NOT interchange parts between standard and counter rotation models. Identify gearcase type prior to disassembly. Make sure the “CR” marking is on the end of the propeller shaft.

Pre-Disassembly Inspection
Refer to Pre-Disassembly Inspection on p. 297.

Propeller Shaft Bearing Housing Removal

IMPORTANT: The propeller shaft bearing housing on “M2” type gearcases is PRESSED into gearcase housing.

Remove the two retaining screws holding the propeller shaft bearing housing.

006835

  1. “CR” marking
  2. Retainer screws

Remove the propeller shaft bearing housing from the gearcase using:

  • Propeller Shaft Bearing Housing Puller Kit, P/N 354060.

DO NOT use tools designed to push on the propeller shaft. Pushing against the propeller shaft could damage the forward gear thrust bearing or thrust washer.

Install the threaded adaptor from the puller kit on to the propeller shaft until seated.

006833

Assemble puller kit components. Hold adaptor with wrench and turn nut clockwise to pull bearing housing.

006834

Pull propeller shaft and bearing housing far enough to loosen the PRESSED bearing housing from the gearcase housing.

006837
“M2” Type Gearcase

Remove propeller shaft, forward gear and bearing housing assembly from gearcase.

006850

Pinion Gear Removal and Driveshaft Servicing
Refer to Pinion Gear and Driveshaft Removal on p. 299.

Shift Housing, Gear and Propeller Shaft Removal

Push down on the shift rod. This will move the detent lever downward to clear the inside of the gearcase when the shaft assembly is pulled out. Unscrew the shift rod from the detent lever. Remove screws, cover, and shift rod from the gearcase.

Discard the cover gasket. Remove the shift rod O ring from inside of cover and discard.

006884

  1. Cover gasket

Use an appropriate tool to apply downward pressure on the detent while pulling on the propeller shaft assembly. Remove propeller shaft assembly from the gearcase.

006929

Counter Rotation Models

  1. Tool

Water Intake Screens

Remove and clean water intake screens. Replace if damaged.

006886

  1. Water intake screen
Share on social:

Related Products