Parts Layout (PT Model)
Clamp Bracket (For TP & P Models)
P/L Fig. 14

| Ref No. | Description | Q'ty | Remarks |
|---|---|---|---|
| 1 | Clamp Bracket (PTT-Right) | 1 | Starboard |
| 2 | Clamp Bracket (PTT-Left) | 1 | Port |
| 3 | Swivel Bracket Shaft Ass’y | 1 | |
| 4 | Nylon Nut, 7/8 | 1 | |
| 5 | Washer, 22-36-1 | 2 | Nylon |
| 6 | Plate | 1 | |
| 7 | Bracket Shaft Cap | 2 | for TP |
| 8 | Clamp Screw Ass’y | 2 | |
| 8-1 | Clamp Screw | 2 | |
| 8-2 | Clamp Screw Handle | 2 | |
| 8-3 | Rivet, 3-22 | 2 | |
| 9 | Clamp Screw Pad | 2 | |
| 10 | Swivel Bracket Ass’y (PTT) | 1 | |
| 11 | Grease Fitting | 3 | |
| 12 | Tilt Stopper | 1 | |
| 13 | Tilt Stopper Grip | 1 | |
| 14 | Collar, 10.2-12-12 | 2 | |
| 15 | Washer | 1 |
| Ref No. | Description | Q'ty | Remarks |
|---|---|---|---|
| 16 | Spring Pin, 3.5-16 | 1 | |
| 17 | Tilt Stopper Spring | 1 | |
| 18 | Trim Lock Pin | 2 | |
| 19 | Washer, 8.1-16-1.5 | 2 | |
| 20 | Nylon Nut (2T), M8 P-1.25 | 2 | |
| 21 | Anode | 2 | |
| 22 | Bolt | 2 | M6 L=16 mm |
| 23 | Ground Cable | 1 | L=130 |
| 24 | Bolt | 1 | M6 L=16 mm |
| 25 | Bolt | 2 | M6 L=16 mm |
| 26 | Ground Cable | 2 | |
| 27 | Power Tilt Ass’y | 1 | |
| 28 | Cylinder Pin (Upper) | 1 | |
| 29 | Bushing, 13-16-31 | 5 | |
| 30 | Bushing, 13-17-19.5 | 2 | |
| 31 | Bolt | 1 | M6 L=16 mm |
| 32 | Washer, 6.5-23-1.5 | 1 | |
| 33 | Cylinder Pin (Lower) | 1 |

| Ref No. | Description | Q'ty | Remarks |
|---|---|---|---|
| 34 | Washer, 8.5-28-1 | 2 | |
| 35 | Bolt | 2 | M8 L=20 mm |
| 36 | Lead Wire Band, 203 | 2 | |
| 37 | Co-Pilot Handle | 1 | for TP |
| 38 | Washer, 8.1-20-0.8 | 1 | for TP |
| 39 | Co-Pilot Bolt | 1 | for TP |
| 40 | Nylon Nut, 8P-1.25 | 1 | for TP |
| 41 | Washer | 1 | for TP |
| 42 | Co-Pilot Plate | 1 | for TP |
| 43 | Bolt | 2 | for TP M6 L=16 mm |
| 44 | Co-Pilot Washer | 1 | for TP |
| 45 | Co-Pilot Disc | 2 | for TP |
| 46 | Co-Pilot Decal | 1 | for TP |
| 47 | Steering Shaft | 1 | |
| 48 | Stud Bolt | 2 | |
| 49 | Rubber Mount (Upper) | 2 | |
| 50 | Bolt | 4 | M6 L=20 mm |
| 51 | Damper (Upper) | 1 |
| Ref No. | Description | Q'ty | Remarks |
|---|---|---|---|
| 52 | Washer | 2 | |
| 53 | Nut | 2 | |
| 54 | Bushing, 24-30-30 | 1 | |
| 55 | Bushing, 24-30-30 | 1 | |
| 56 | Thrust Plate, 22-44-2 | 2 | |
| 57 | O-Ring, 3.5-22 | 1 | Do not reuse. |
| 58 | Rubber Mount (Lower) | 2 | |
| 59 | Mount Bracket (Right) | 1 | Starboard |
| 60 | Mount Bracket (Left) | 1 | Port |
| 61 | Bolt | 2 | M6 L=52 mm |
| 62 | Friction Piece | 1 | |
| 63 | Friction Spring | 1 | |
| 64 | Bolt | 1 | M8 L=30 mm |
| 65 | Bolt | 4 | M8 L=85 mm |
| 66 | Washer | 4 | |
| 67 | Washer | 4 | |
| 68 | Nylon Nut | 4 | M8 |
| 69 | Carrying Handle | 1 | for P |
Power Tilt Ass'y
P/L Fig. 15

| Ref No. | Description | Q'ty | Remarks |
|---|---|---|---|
| 1 | Cap Ass’y | 1 | |
| 1-1 | O-Ring | 1 | Do not reuse. |
| 2 | Manual Valve Ass’y | 1 | |
| 2-1 | O-Ring, 2.4-9.8 | 1 | Do not reuse. |
| 2-2 | O-Ring | 1 | Do not reuse. |
| 3 | C-Ring | 1 | |
| 4 | Seal Washer | 1 | |
| 5 | Relief Valve Ass’y | 1 | |
| 5-1 | O-Ring | 1 | Do not reuse. |
| 6 | Valve Ass’y | 1 | |
| 6-1 | O-Ring, 1.5-3.5 | 1 | Do not reuse. |
| 7 | O-Ring | 2 | Do not reuse. |
| 8 | Pump | 1 | |
| 9 | Bolt | 2 | |
| 10 | Bolt | 1 | |
| 11 | Filter | 1 | |
| 12 | Pump Coupling | 1 | |
| Ref No. | Description | Q'ty | Remarks |
|---|---|---|---|
| 13 | O-Ring, 2-62.5 | 1 | Do not reuse |
| 14 | Band | 1 | |
| 15 | Screw | 1 | |
| 16 | Bolt | 2 | |
| 17 | Motor Bracket Ass’y | 1 | |
| 17-1 | Breaker | 1 | |
| 17-2 | Breaker Holder | 1 | |
| 17-3 | O-Ring | 1 | Do not reuse |
| 17-4 | Brush | 1 | |
| 17-5 | Brush Spring | 2 | |
| 17-6 | Screw | 3 | M5 L=12 mm |
| 17-7 | Brush Holder | 1 | |
| 17-8 | Oil Seal | 1 | |
| 18 | Armature Ass’y | 1 | |
| 19 | Yoke Ass’y | 1 | |
| 20 | Screw | 2 | M5 L=12 mm |
