PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Service Manual 200-250 HP 3.3 L E-TEC Gearcase [Gearcase Housing Inspection]

Related Products:
Service Manual 200-250 HP 3.3 L E-TEC Gearcase [Gearcase Housing Inspection]
5007531
BRP Marine

Service Manual

Remove propeller shaft assembly from gearcase.

Water Intake Screens

Remove and clean water intake screens. Replace if damaged.

  1. Water intake screen

GEARCASE HOUSING INSPECTION

Thoroughly clean gearcase housing to remove all dirt and debris prior to inspection. Inspect pinion bearing and forward thrust surface of gearcase housing.

Use Gearcase Alignment Gauge Kit, P/N 5006349 to check the condition of gearcase housing prior to reassembly. Refer to instructions provided with kit. Use additional Gauging Head as follows:

  • P/N 5007750, for “L2” Type gearcase housings
  • P/N 5007749, for “M2” Type gearcase housings

IMPORTANT: DO NOT force gauging shaft into alignment hole. Shaft MUST slide easily into hole of gauging head. If shaft does not slide into hole, gearcase housing is damaged and must be replaced.

  1. Gauging shaft
Share on social:

Related Products