EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART
| Step | Procedure/Part name | Q'ty | Service points |
|---|---|---|---|
| POWER UNIT REMOVAL 1 | Follow the left "Step" for removal. | ||
| Battery cables (at the battery) | |||
| Throttle cables (EH, EHT) | |||
| Engine stop switch leads (EH, EHT) | |||
| 1 | Fitting plate | 1 | |
| 2 | PTT motor lead | 2 | Blue, Green |
| 3 | Plastic locking tie | 1 | |
| 4 | Oil pan breather hose | 1 | |
| 5 | Fuel hose (fuel filter-to-fuel pump) | 1 | |
| 6 | Pilot water hose | 1 |
EXPLODED DIAGRAM

| Step | Procedure/Part name | Q'ty | Service points |
|---|---|---|---|
| 7 | Trailer switch coupler | 1 | 3 pins |
| 8 | Shift link rod | 1 | |
| 9 | Starter switch lead (EH, EHT) | 2 | |
| 10 | Neutral switch lead (EH, EHT) | 2 | |
| Reverse the removal steps for installation |
EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART
| Step | Procedure/Part name | Q'ty | Service points |
|---|---|---|---|
| POWER UNIT REMOVAL 2 | Follow the left "Step" for removal. | ||
| 1 | Oil level gauge | 1 | |
| 2 | Apron | 1 | |
| 3 | Power unit | 1 | |
| 4 | Dowel pin | 2 | |
| 5 | Upper casing gasket | 1 | Not reusable |
| Reverse the removal steps for installation. |
