ELECTRICAL UNIT

REMOVAL AND INSTALLATION CHART
| Step | Procedure/Part name | Q'ty | Service points |
|---|---|---|---|
| ELECTRICAL UNIT REMOVAL | Follow the left "Step" for removal, | ||
| 1 | Starter relay lead | 2 | for electrical starter model |
| 2 | Bolt (with washer) | 1 | 6 x 30 mm |
| 3 | Nut | 1 | |
| 4 | Spring washer | 1 | |
| 5 | Battery cable | 1 | |
| 6 | Bolt (with washer) | 1 | |
| 7 | Cylinder head ground lead | 1 | |
| 8 | Bolt (with washer) | 1 | 6 x 25 mm |
| 9 | Bolt (with washer) | 2 | 6 x 20 mm |
| 10 | Electrical unit | 1 | |
| 11 | Bolt (with washer) | 1 | for 2P connector model: 6x16 mm |
| 12 | Rectifier regulator | 1 | |
| 13 | Screw (with washer) | 1 | for electrical starter model |
| 14 | Rectifier | 1 | |
| 15 | Bolt (with washer) | 2 | 6 x 20 mm |
| 16 | Clamp | 1 | |
| 17 | CDI unit | 1 | |
| 18 | Bolt (with washer) | 2 | 6 x 18 mm |
| 19 | Ignition coil | 2 | |
| ELECTRICAL UNIT DISASSEMBLY | |||
| (1) | Nut | 1 | |
| (2) | Spring washer | 1 | |
| (3) | Lead wire | 1 | |
| (4) | Starter relay | 1 | |
| (5) | Bolt (with washer) | 2 | 6x14 mm |
| (6) | Starter relay bracket | 1 | |
| (7) | Bolt (with washer) | 2 | |
| (8) | Starter motor | 1 | |
| (9) | Starter motor bracket | 1 | |
| Reverse the removal steps for installation. |
