PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Lower Unit [Driveshaft And Lower Case] [2015]

Related Products:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1997 - 2005 8hp All
Yamaha International 2001 - 2005 8hp All
Yamaha Outboard 1997 - 1999 6hp All
Yamaha International 2001 - 2005 6hp All

Lower Unit [Driveshaft And Lower Case] [2015]
LIT-18616-01-64
Yamaha Marine

CONTENTS

Item Refer to page
1 Electrical wiring 3-2 ~ 3-3
2 Fuel line 3-4
3 Gear oil level 3-5
4 . Operation of controls and moving parts 3-5
5 Fuel leakage 3-5
6 Water leakage 3-6
7 Exhaust leakage 3-6
8 Engine and lower unit noise 3-6
9 Idle-speed 3-6
10 Ignition timing 3-6
11 Motor exterior 3-6
12 Instructing the new owner 3-6

ELECTRICAL WIRING

6CM ✔ 6CEM
8CM ✔ 8CEM

(1) C.D.I. unit
(2) Ignition coil
(3) Rectifier regulator*
(4) 2P connector*
(5)Engine stop switch

  • For Europe model

B : Black
Br : Brown
G:GREEN
G/W : Greenn/White
O: Orange
R : Red
W : White
W/R :White/Red

(1) C.D.I. unit
(2) Ignition coil
(3) Neutral switch
(4)Starter switch
(5) Engine stop switch
(6) Battery
(7) Starter motor
(8)Fuse W
(9) Starter relay
(10) Rectifier

B : Black
Br : Bro
G : Green
G/W : Green/White
0 : Orange
R : Red
W : White
W/R : White/Red

FUEL LINE

PREDELIVERY SERVICE

GEAR OIL LEVEL

Remove the oil-drain
(1) and oil-level
(2) plugs, and add the gear oil through the oil drain hole until it overflows from the oil level hole. Refit the plugs. (The oil level plug first.).

OPERATION OF CONTROLS AND MOVING PARTS

  1. Check shift control for normal operation.

  2. Check steering control for smooth operation.

  3. Check throttle control for smooth operation.

  4. Check ignition timing for normal operation.

  5. Check cowling lock and release mechanism for normal operation.

  6. Check starting system for normal operation.

CAUTION: Use a 25:1 fuel mixture to start the engine.

WARNING: Before attempting to check the starting system, replace the propeller with the specified test propeller, and install the motor in a test tank.

Test propeller: /90890-01625

  1. Check for normal operation of the engine stop system.

FUEL LEAKAGE

Check for fuel leakage..

WATER LEAKAGE

Check for water leakage..

EXHAUST LEAKAGE

Check for exhaust leakage..

ENGINE AND LOWER UNIT NOISE

Check the engine and lower unit for abnormaL noise..

IDLE-SPEED

Check that the engine speed at fully-closed
throttle is correct.

IGNITION TIMING

Check that the ignition timing at fullyclosed and fully-open throttle positions is
correct..

MOTOR EXTERIOR

Check the motor exterior for any flaking of
the paint, and if necessary touch-up with
paint of the original color..

INSTRUCTING THE NEW OWNER

Instruct the new owner on the operation of
all controls and the break-in procedure.
Also advise him on propeller-to-boat matching.

Share on social:

Related Products