PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Periodic Inspection And Adjustment [Lower Unit:Bracket Unit] [1996]

Related Products:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1996 150hp All
Yamaha Outboard 1996 175hp All
Yamaha Outboard 1996 200hp All
Yamaha Outboard 1996 225hp All
Yamaha Outboard 1996 250hp All

Periodic Inspection And Adjustment [Lower Unit:Bracket Unit] [1996]
LIT-18616-01-41
Yamaha Marine

LOWER UIMIT/BRACKET UNIT

Pressure tester: YB-03595/90890-06762

  • Apply the specified pressure

Pressure: 100 kPa (1.0 kg/cm2,14.2 psi)

  • Check that the pressure is held as specified for 10 seconds.

NOTE:
Do not over-pressurize. Excess pressure may cause the air to leak out.

BRACKET UNIT

Cowling hook adjustment

  1. Inspect:
  • Cowling lock and release
    Weak engagement -> Adjust

Adjustment steps:

  • Remove the top cowling.
  • Loosen the bolts by approximately a quarter turn.
  • Tap the end of the hook to make an approximate adjustment.

Moving the hook towards the seal -> Loosen the cowling.

Moving the hook away from the seal -> Tighten the cowling.

  • Tighten the bolts
Share on social:

Related Products