Step 1: BATTERY STORAGE
- When the outboard motor will not be used for a month or longer, remove the battery and store it in a cool, dark place. Do not set battery on concrete or earth, as this will accelerate loss of charge.
- Wash the casing and terminals using fresh water only, then dry with clean cloth.
- Fully charge the battery. if the battery will be stored for a long period of time, check the specific gravity of the fluid at least once a month and recharge the battery when the charge is low.
Failure to take proper precautions when charging the battery can be hazardous. Batteries produce explosive vapors that can ignite. Battery acid is poisonous and corrosive, and can cause severe injury.
• Do not smoke and keep battery away from open flames and sparks.
• To avoid creating a spark when charging the battery, connect the battery charger cables to the proper terminals before turning the charger on.
• Handle the battery with extreme care and avoid skin contact with battery acid.
• Wear proper protective clothing (Safety glasses, gloves, etc.)
Step 2: AFTER STORAGE
When taking your motor out of storage, follow the procedure below to return it to operating condition:
- Thoroughly clean the spark plugs. Replace them if necessary.
- Check the gear-case oil level and it necessary, add gear oil according to the procedure outlined in the GEAR OIL section.
- Lubricate all moving parts according to the LUBRICATION section.
- Check the engine oil level.
- Clean the motor and wax the painted surfaces.
- Recharge the battery before installing it.
Step 3: GENERAL INFORMATION
WARRANTIES (For U.S.A)
The warranties covering your outboard motor are explained in a separate Limited Warranty booklet given to you at the time of sale. Please read this booklet carefully so you can under- stand your rights and responsibilities.
