PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Owner's Manual DF40, DF50 Motor Installation

Related Products:
Owner's Manual DF40, DF50 Motor Installation
99011-87J09-03A
Suzuki Marine

MOTOR INSTALLATION

Do not overpower your boat. Never install an outboard motor with horsepower exceeding the manufacturer’s recommended maximum horse power (listed on the boat “Certification Plate”).
Excessive horsepower will have an adverse effect on hull safety and may cause operating/handling difficulties.
The boat may also sustain stress and hull damage. It is against federal regulations for any marine dealer to service a motor that exceeds the recommended maximum horsepower for your boat.
Contact your authorized Suzuki Marine Dealer if you are unable to locate the hull “Certification Plate”.

Suzuki strongly recommends that you have your outboard motor, controls and gauges installed by your authorized Suzuki Marine Dealer. He has the tools, the facilities and the know-how.

Failure to have your outboard motor and associated controls and gauges properly installed can result in personal injury or damage.

BATTERY INSTALLATION

BATTERY INSTALLATION

Suzuki recommends use of a high quality battery for this engine, meeting these minimum requirements:

TYPE MARINE
COLD CRANK AMPS (CCA) 389 Amperes or over
RESERVE CAPACITY (RC) 115-minutes or over
AMP HOUR 12 Volt, 70 AH or over

Secure the battery in a dry area of the boat, away from vibration.

To hook up the battery, first connect the red lead from the motor to the positive battery terminal, then connect the black lead to the negative battery terminal.

To remove the battery, first disconnect the black lead from the negative terminal, then disconnect the red lead from the positive terminal.

Connecting and disconnecting the battery as described above will help minimize the chance of creating an accidental short circuit and sparks.

Share on social:

Related Products