COVID-19 UPDATE: How Crowley Marine is preparing & responding. Read more...
flat $3.95 shipping
My Account
Order Status
Crowley Marine: serving boaters for over 50 years
Parts in stock Most parts in stock Same day fulfillment
$3.95 shipping on all orders*
Low Price Guarantee
9.6 Pilot logo
0My cart

Select Your Engine:

OE ICON II Single Binnacle Control User's Guide Winterization

OE ICON II Single Binnacle Control User's Guide Winterization
BRP Marine

WINTERIZATION

Use this function to inject additional quantities of oil into the outboard for safe long term stor age.

  1. Turn the key switch to OFF.

  2. Move the lever to the FORWARD wide open throttle position.

  1. Turn the key switch to ON and wait a minimum of (3) seconds.

  2. Attempt to start the outboard (3) times within three seconds (the starter will not engage or crank the outboard).

  3. Move the lever to NEUTRAL and start the outboard.

  4. Run the outboard at idle for a minimum of (3) seconds.

  5. With the outboard running, attempt to start the engine (3) times within (3) seconds (the starter will not engage or crank the outboard).

The remote control will send the winterization message to the outboard using the public net work. The outboard will automatically turn OFF when the process is complete.

After initiation of the winterization process, the remote control will ignore all throttle, gear, and control head switch operations. The control will still acknowledge Key OFF and/or Emergency Stop inputs.

Troubleshooting Tip: Be sure the throttle lever is all the way in the FORWARD wide open throttle position when starting winterization.