Screen Features
Home 1
Press the Home button or the Home icon to access the Home 1 screen.

The Home screen shows data for Port and Starboard outboards. The data shown is:
- RPM
o Port and Port Center RPM data is highlighted in Red
o Starboard Center and Starboard RPM data is highlighted in Green
Coolant Temperature or Coolant Pressure (if available from the outboard)
Trim Position
| Problem | Solution | |
|---|---|---|
| Trim Position Troubleshooting Tip | Trim position is not accurate. Trim position does not display. | Reset the Trim/Tilt calibration level. See Trim/Tilt Calibration on page 25. |
Speed Over Ground (SOG) — requires GPS antenna input; use BRP P/N 767488
Fuel Consumption — vessel gallons per hour (V-GPH) — sum of all outboards
Fuel Economy — miles per gallon (MPG) — requires Speed Over Ground input (from GPS antenna) or Speed Over Water (SOW) input
o Speed Over Water input requires the use of one of the following transducers:
● BRP P/N 764671 — Transom mount (speed, depth, temp) transducer
● BRP P/N 764673 —Thru hull (speed, depth, temp) transducer
● BRP P/N 765150 — Transom mount (speed only) transducer
Home 2
For single outboard applications only:
From any page, press the Home button two times.

The data shown is:
RPM
Trim %
Speed Over Ground — requires GPS speed input
Water Pressure — requires 0-50 psi pressure input transducer, use BRP P/N 5008640
| Problem | Solution | |
|---|---|---|
| Water Pressure Troubleshooting Tip | Water pressure does not display or is not accurate. | Reset the water pressure range; use Evinrude Diagnostic software (see your dealer). |
