DISASSEMBLING/ASSEMBLING THE LOWER CASE ASSEMBLY

| Order | Job/Part | Q'ty | Remarks |
|---|---|---|---|
| Forward gear | 2 | Refer to "DRIVE SHAFT (REGULAR ROTATION MODELS)" on page 6-17. | |
| 1 | Drive shaft sleeve | 1 | |
| 2 | Needle bearing | 1 | |
| 3 | Tapered roller bearing outer race 1 | 1 | |
| 4 | Forward gear shim | * | |
| 5 | Water seal | 1 | |
| 6 | Plate | 1 | |
| For assembly, reverse the disassembly procedure. |
*: As required
DISASSEMBLING THE LOWER CASE ASSEMBLY
- Remove:
- Needle bearing
Bearing/oil seal attachment.......(1)
YB-06194/90890-06636
Driver rod....................................(2)
YB-06071 / 90890-06605

- Remove:
- Tapered roller bearing outer race
Slide hammer..............................(1)
YB-06096
Bearing puller..............................(2)
90890-06523
Large universal claws................(3)
90890-06532

CHECKING THE DRIVE SHAFT SLEEVE
Check:
- Drive shaft sleeve
Damage/wear-> Replace.
CHECKING THE NEEDLE BEARING
Check:
- Needle bearing
Pitting/rumbling -> Replace.
ASSEMBLING THE LOWER CASE ASSEMBLY
- Install:
- Tapered roller bearing outer race
Bearing/oil seal attachment.........(1)
YB-06199/90890-06620
Driver rod....................................(2)
YB-06071/90890-06605

- Install:
- Needle bearing
Needle bearing installation position (a) 168 ± 0.25 mm (6.61 ± 0.01 in)
Needle bearing installation position (b) 184.0 mm (7.24 in)
Bearing/oil seal attachment......(a)
YB-06194 / 90890-06636
Driver rod.................................... (2)
YB-06071 / 90890-06602
Bearing/oil seal depth plate.......(3)
YB-06213 / 90890-06603
YB-34474

[A] For USA and Canada
[B] For worldwide
