SPECIAL TOOLS
The use of correct special tools recommended by Yamaha will aid the work and enable accurate assembly and tune-up. Improvisations and use of improper tools can cause damage to the equipment.
SPECIAL TOOLS FOR TUNE-UP
| Ref. No. | Tool name | Part number |
|---|---|---|
| 1 | Compression gauge set | YU-33223 |
| 2 | Tachometer | YU-8036 |
| 3 | Digital multimeter | YU-33263 |
| 4 | Timing light | YM-33277 |
| 5 | Ignition coil tester | YU-33261 |
| 6 | Dial gauge set | YU-3097 |
| 7 | Test propeller | YB-1621 |
SPECIAL TOOLS FOR ENGINE SERVICE
| Ref.No. | Tool name | Part number |
|---|---|---|
| 1 | Flywheel holder | YB-6139 |
| 2 | Flywheel puller | YB-6117 |
| 3 | Bearing separator | YB-6219 |
| 4 | Con-rod small end bearing installer | YB-6106 |
| 5 | Handle | YB-6071 |
| 6 | Attachment B | YB-6015 |
| 7 | Attachment E | YB-6021 |
SPECIAL TOOLS FOR LOWER UNIT SERVICE
| Ref.No. | Tool name | Part number |
|---|---|---|
| 1 | Bearing puller | YB-6096 |
| 2 | Drive shaft holder | YB-6368 |
| 3 | Pinion nut holder | YB-6078 |
| 4 | Baclash indicator rod | YB-6265 |
| 5 | Dial gauge stand | YB-7003 |
| 6 | Dial gauge | YU-3097 |
| 7 | Bearing housing puller | YB-6234 |
| 8 | Spacer | YB-6373 |
| 9 | Collar | YB-6374 |
| 10 | Driver head | YB-6346 |
| 11 | Driver head taper roller Bearing outer race | YB-6085 |
| 12 | Bearing housing puller | YB-6285 |
| 13 | Driver rod | YB-6229 |
| 14 | Magnetic plate | YB-7003 |
| 15 | Oil seal installer | YB-6168 |
| 16 | Shimming gauge | YB-6344 |
| 17 | Shimming gauge | YB-6400 |
SEALING AGENTS AND LUBRICANTS
| Ref. No. | Part name | Part number |
|---|---|---|
| 1 | Gasket maker | 907-90740-01-00 |
| 2 | Marine grease | LUB-GEARS-14-00 |
| 3 | Gear case lube (11 oz) | LUB-GEARL-11-00 |
| 4 | Yamalube two cycle outboard oil | ACC-11000-07-01 |
