SPECIAL TOOLS
A80000-0*
Using the correct special tools, recommended by Yamaha, will aid the work and enable accurate assembly and tune-up. Improvisations and the use of improper tools can cause damage to the equipment.
NOTE:
- For U.S.A, and Canada, use part number starting with "J-", "YB-", "YM-", "YU-" or "YW-".
- For others, use part number starting with "90890-".
MEASURING


- Tachometer
P/N. YU-08036-A..............(a)
90890 - 06760..........(b) - Pressure tester
P/N. YB-03595
90890-06762 - Mity vac
P/N. YB-35956
90890-06756 - Height gauge
P/N. YB-34432-7, YB-34432-11
90890-06702 - Dial gauge
P/N. YU-03097
90890-01252 - Flexible stand
P/N. YU-34481
90890-06705 - Digital caliper
P/N. 90890-06704 - Backlash indicator
P/N. YB-06265
90890-06706 - Plate
P/N. YB-07003 - Pressure gauge
P/N. YB-06181
90890-06181 - Digital tester
P/N. J-39299 - Peak volt adapter
P/N. YU-39991 - Spark gap tester
P/N. YM-34487
90890-06754
REMOVAL AND INSTALLATION

- Flywheel holder
P/N. YB-06139...........(a)
90890-06522......(b) - Universal puller
P/N. YB-06117
90890-06521 - Bearing attachment (Crankshaft bearing housing)
P/N. YB-06205
90890-06663 - Driver rod
P/N. YB-06071
90890-06604, 90890-06605,
90890-06606 - Bearing separator
P/N. YB-06219
90890-06534 - Ring nut wrench
P/N. YB-34447
90890-06512 - Extension
P/N. 90890-06513 - Bearing housing puller
P/N. YB-06207
90890-06502 - Stopper guide plate
P/N. 90890-06501 - Center bolt
P/N. 90890-06504 - Slide hammer
P/N. YB-06096
90890-06531 - Puller head
P/N. YB-06335
90890-06514 - Stopper guide stand
P/N. 90890-06538

- Bearing puller
P/N. 90890-06535 - Claw
P/N. 90890-06536 - Needle bearing attachment (Propeller shaft housing)
P/N. YB-06195, YB-06196
90890-06610, 90890-06631
90890-06633, 90890-06637 - Bearing depth plate
P/N. 90890-06603 - Drive shaft holder
P/N. YB-06201
90890-06520 - Pinion nut holder
P/N. 90890-06505 - Needle bearing attachment (Forward and reverse gear)
P/N. YB-06200
90890-06612
(Lower case)
P/N. YB-06246
90890-06636 - Bearing installer (Forward and reverse gear)
P/N. 90890-06660 - Bearing outer race puller
P/N. YB-06029
90890-06523 - Outer race puller claw
P/N. 90890-06532, 90890-06533 - Bearing installer (Lower case)
P/N. YB-06258, YB-06336
90890-06619, 90890-06629 - Trim/Tilt cylinder wrench
P/N. YB-06175-2B
90890-06544 - Piston ring compressor
P/N. YU-33294...........(a)
90890-06530..... (b)
