SPECIAL TOOLS
A80001-0*
The use of correct special tools recommended by Yamaha will aid the work and enable accurate assembly and tune-up.
Improvisations and use of improper tools can cause damage to the equipment.
SPECIAL TOOLS FOR TUNE-UP
| No. | TOOL NAME | PART NUMBER |
|---|---|---|
| 1 | Compression gauge | YU-33223 |
| 2 | Tachometer | YU-08036-A |
| 3 | Digital multimeter | YU-33263 |
| 4 | Timing light | YM-33277 |
| 5 | CDI tester | YU-91022-B |
| 6 | Dial gauge set | YU-3097 |
| 7 | Test propeller | YB-1611 |
SPECIAL TOOLS FOR ENGINE SERVICE
| No. | TOOL NAME | PART NUMBER |
|---|---|---|
| 1 | Flywheel magneto holder | YB-6139 |
| 2 | Universal puller | YB-6117 |
| 3 | Connecting rod bearing installer | YB-6106 |
SPECIAL TOOLS FOR LOWER UNIT SERVICE
| No. | TOOL NAME | PART NUMBER |
|---|---|---|
| 1 | Bearing housing nut torquing tool (Gland nut wrench) | YB-6048 |
| 2 | Drive shaft needle bearing remover and installer | YB-6063 |
| 3 | Drive handle - large | YB-6071 |
| 4 | Drive shaft holder - Pinion nut torquing | YB-6079-A |
| 5 | Slide hammer and adapters | YB-6096 |
| 6 | Drive shaft taper roller bearing cup installer | YB-6110 |
| 7 | Bearing housing needle bearing installer | YB-6111 |
| 8 | Bearing housing needle bearing remover | YB-6112 |
| 9 | Universal puller | YB-6117 |
| 10 | Oil seal tool attachment (Water pump oil seal) | YB-6168 |
| 11 | Bearing splitter plates | YB-6219 |
| 12 | Bearing housing puller | YB-6234 |
| 13 | Backlash indicator rod | YB-6265 |
| 14 | Bearing housing oil seal installer | YB-6269 |
| 15 | Forward and reverse gear bearing installer | YB-6270-A |
| 16 | Forward gear bearing cup installer | YB-6277-A |
| 17 | Magnetic plate | YB-7003 |
| 18 | Filler gauge (thickness gauge) | YU-26900-9 |
| 19-1 | Pinion shim selecting tool (Gauge block) | YB-34432-8 |
| 19-2 | Pinion shim selecting tool (Adapter plate) | YB-34432-10-A |
| 19-3 | Pinion shim selecting tool (Gauge base) | YB-34432-11-A |
| 19-4 | Pinion shim selecting tool (Clamp) | YB-34432-17-A |
| 20-1 | Forward gear shim selecting tool (Base plate) | YB-34446-1 |
| 20-2 | Forward gear shim selecting tool (Compression spring) | YB-34446-3 |
| 20-3 | Forward gear shim selecting tool (No. 1 press plate) | YB-34446-4 |
| 20-4 | Forward gear shim selecting tool (Gauge pin) | YB-34446-6 |
| 21 | Reverse gear shiming gauge | YB-34468-4 |
| 22 | Drive shaft bearing depth stop | YB-34474 |
| 23 | Flexible magnetic dial indicator stand | YU-34481 |
| 24 | Lower unit pressure/Vacuum tester | YB-35956 |
SPECIAL TOOLS SPECIAL TOOLS FOR POWER TILT SERVICE
| No. | TOOL NAME | PART NUMBER |
|---|---|---|
| 1 | Trim and tilt cylinder wrench | YB-6175-1A |
| 2 | Trim and tilt cylinder wrench | YB-6175-2A |
| 3 | Oil pressure gauge (Trim and tilt gauge) | YB-6181 |
| 4 | Power tilt cylinder cap wrench | YB-34466 |
SEALING AGENTS AND LUBRICANTS
| No. | PART NAME | PART NUMBER |
|---|---|---|
| 1 | Gasket maker | 90790-74001-00 |
| 2 | Marine grease | LUB-GREAS-14-00 |
| 3 | Power trim/tilt fluid (11 oz) | LUB-PWRTF-11-00 |
| 4 | Gear case lube (11 oz) | LUB-GEARL-11-00 |
| 5 | Yamalube two cycle outboard oil (TC-W3) | ACC-11000-07-02 |
