ELECTRICAL COMPONENTS

(1) Flywheel rotor ass'y
(2) Ignitor ass'y lead
(3) High tension cord
(4) Spark plug cap
(5) Engine stop switch lead
(6) Engine stop switch
[A] Pass the engine stop switch lead into the bottom cowling port side slit.
[B] Clamp the engine stop switch lead by the clamp on the bottom cowling.
[C] Ground the cylinder body. Pass the engine stop switch
[D] Clamp the high-tension cord to the clamp on the bottom cowling, using the clamp provided.
[E] Fix the grommet on the high tension cord approximately 20 mm (0.8 in) from the plug cap end, using an adhesive in the shaded area.
