PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Electrical System [Power Trim And Tilt (Ptt) Control System] [1998]

Related Products:

Applicable Models

Model group Year Model Serial
Yamaha International 1998 25hp All
Yamaha Outboard 1998 25hp All

Electrical System [Power Trim And Tilt (Ptt) Control System] [1998]
LIT-18616-01-77
Yamaha Marine

POWER TRIM AND TILT (PTT) CONTROL SYSTEM (ET)

(1) Battery
(2) Fuse
(3) Trailer switch
(4) Connector
(5) PTT relay
(6) PTT motor
B : Black
G : Green
L : Blue
Lg : Light green
R : Red
Sb : Sky blue

POWER TRIM AND TILT (PTT) CONTROL SYSTEM (EHT)

(1) Battery
(2) Fuse
(3) Trailer switch
(4) PTT relay
(5) PTT motor
B : Black
G : Green
L : Blue
Lg : Light green
R : Red
Sb : Sky blue

FUSE

Refer to "STARTING SYSTEM".

BATTERY

Refer to "GENERAL" in chapter 3.

TRAILER SWITCH

  1. Check:
    • Continuity
    No continuity -> Replace.

PTT RELAY

  1. Check:
    • Continuity
    Out of specification -> Replace.
PTT relay continuity: PTT relay continuity:
Sky blue (Sb) - Black (B)
Light green (Lg) - Black (B)
Continuity
Terminal (1) - Terminal (-)
Terminal (2)-Terminal (-)
Continuity
Terminal (1) - Terminal (+)
Terminal (2) -Terminal (+)
No continuity

  1. Check:
    • Relay operation
    Does not function -> Replace.

Checking steps:
• Connect the tester between the termi nals of the PTT relay.
• Connect a 12 V battery.

Light green (Lg) lead -> Positive terminal
Black (B) lead -> Negative terminal

• Check that there is continuity between the PTT relay terminals.
• Connect the tester between the terminals of the PTT relay.
• Connect a 12 V battery.

Sky blue (Sb) lead -> Positive terminal
Black (B) lead -> Negative terminal

• Check that there is continuity between the PTT relay terminals.

PTT MOTOR

Refer to "PTT MOTOR DISASSEMBLY" in chapter 7.

Share on social:

Related Products