DESCRIPTION
This model uses the capacitor discharge ignition (C.D.I.) system, and each cylinder is provided with an ignition coil.
The C.D.I. unit incorporates four condensers, which discharge the stored positive and negative charges to the ignition coils depending on the signal from the pulser coil.
This model is also provided with a power trim and tilt unit, which is hydraulically operated, as standard equipment. Among other new technical features are the oil feed pump for the oil injection system and a large capacity 70Ah battery to supply power to various warning lamps.
The battery is charged with power generated by the lighting coil. To charge, the AC voltage generated by the lighting coil is converted in to DC voltage (max. 14.5V) by the rectifier regulator.
Before starting the disassembly, assembly or checking of electrical parts, be sure to remove the battery wires and the spark plug cap.
Electrical parts should be handled with the following care:
• Protect from severe shocks.
• Keep away from heat.
• Avoid extremely humid places.
- Ignition coil
- Thermo switch
- Lighting coil
- Charge coil
- Pulser coil
- Rectifier regulator
- Fuse (20A)
- Starting motor
- Starter relay
- Power trim and tilt relay
- Trim sensor
- Power trim and tilt motor
- Oil lever sensor (Main oil tank)
- Oil level control unit
- Emergency switch
- Oil level sensor (Sub oil tank)
- Oil feed pump motor
- Power trim and tilt switch
- Main switch
- Buzzer
- Neutral switch
- Choke switch
- Emergency stop switch
- Oil level warning lamps
- Battery
- Tachometer
- Speedometer (Option)
- Trim meter
- Choke solenoid
- C.D.I Unit
- Ignition control unit
B : Black
L : Blue
R : Red
Br : Brown
Lg : Light green
Sb : Sky blue
G : Green
O : Orange
W : White
GY : Gray
P : Pink
Y : Yellow
B/W : Black/White
W/B : White/Black
Br/W: Brown/White
W/R : White/Red
W/Y : White/Yellow
B/R : Black/Red
W/L : White/Blue
