PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Bracket Unit [Tilt Cylinder, Pump Housing And Motor] [1998]

Related Products:

Applicable Models

Model group Year Model Serial
Yamaha International 1998 25hp All
Yamaha Outboard 1998 25hp All

Bracket Unit [Tilt Cylinder, Pump Housing And Motor] [1998]
LIT-18616-01-77
Yamaha Marine

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q'ty Service points
TILT CYLINDER, PUMP HOUSING, AND MOTOR REMOVAL Follow the left "Step" for removal.
1 Reservoir plug 1
2 O-ring 1 8.8x 1.9 mm
3 PTT motor 1
4 Connector shaft 1
5 Tilt cylinder 1
6 Ball 2
7 Plunger 2
8 Spring 2

EXPLODED DIAGRAM

Step Procedure/Part name Q'ty Service points
9 O-ring 4 5.5 x 1.5 mm
10 O-ring 3 10.7 x 1.5 mm
11 Screen 1

Reverse the removal steps for installation

SERVICE POINTS

• To prevent the hydraulic fluid from spurting out due to internal pressure, the outboard should be kept fully tilted up (the tilt rod at full length).
• After removing the tilt motor or oil reservoir, do not push the tilt rod down. This may cause hydraulic fluid to spurt out from the port.

Do not wipe hydraulic system components with rags, paper, tissues, or the like, as fibers from such material will cause malfunctions if they enter the system.

Removal of the tilt cylinder is not necessary for cylinder repair.

Share on social:

Related Products