PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Bracket Unit [Power Trim And Tilt Unit] [2004]

Related Products:

Applicable Models

Model group Year Model Serial
Yamaha International 2004 60hp All
Yamaha Outboard 2004 60hp All

Bracket Unit [Power Trim And Tilt Unit] [2004]
LIT-18616-FT-60
Yamaha Marine

Power trim and tilt unit

No. Part name Q’ty Remarks Tightening torques
Stage N-m kgf-m ft-lb
1 Power trim and tilt 1 EHT/ET models
2 Hydro tilt 1 EHD/ED models
3 Plastic tie 3 Not reusable
4 PTT motor lead 2
5 Washer 2
6 Bolt 2 M8 x 16 mm
7 Circlip 1 EHT/ET models
8 Shaft 1 EHT/ET models
9 Bushing 2 EHT/ET models
10 Collar 1 EHT/ET models
11 Tilt pin 1
12 Collar 1
13 Collar 1
14 Shaft 1
15 Bushing 2 EHD/ED models
16 Circlip 2 EHD/ED models
17 Shaft 1 EHD/ED models
18 Collar 1 EHD/ED models

Removing the power trim and tilt/hydro tilt

  1. Fully tilt the outboard up, and then support it with the tilt stop lever (1).

S62Y7440

WARNING
After tilting up the outboard, be sure to support it with the tilt stop lever.

Otherwise, the outboard could suddenly lower if the power trim and tilt unit should lose fluid pressure.

  1. Loosen the plastic locking tie (2), and then pull out the PTT motor lead (3).

  2. Remove the tilt pin (4).

  3. Remove the circlip(s) (5) and the shaft (6).

  4. Loosen the bolt (7), and then remove the shaft (8).

  5. Remove the power trim and tilt/hydro tilt (9).

NOTE:
To remove the power trim and tilt/hydro tilt, lower the tilt rod slightly.

Share on social:

Related Products