Clip Assembly P/N 431808
This clip assembly is for use, under limited conditions, on models with an Emergency Ignition Cut-Off Switch located in the steering handle. make sure that you are aware of the purpose and benefits of the Emergency Ignition Cut-Off Switch as described in your Owner's/Operator's Manual before disabling.
Outboard motors used in certain applications, e.g. auxiliary power on cruising sailboats or as a trolling motor on larger fishing rigs, may not be able to take advantage of the benefits provided by the Emergency Ignition Cut-Off Switch feature. For applications such as these, the cut-off switch can be disabled by replacing the clip and lanyard assembly (A) with the Clip Assembly (B), as shown. The clip (B) will disable the cut-off switch while retaining the "PUSH" Stop Button feature. If the motor application changes, reactivate the cut-off feature by replacing the clip (B) with the original clip and lanyard assembly (A).