Carburetor and Throttle Cam Kit P/N 433357 and 433358Crowley Marine
These instructions will alter you to certain things you should do very carefully. If you don't, you could...
- hurt yourself or bystanders
- hurt boat operator, passengers
- damage the machinery
Safety symbol, , appears next to information important to prevent you and others from being hurt.
Note symbol, Note, appears next to information important to keep machinery from being damaged.
IMPORTANT: The important safeguards and instructions appearing in these
directions cannot cover all possible conditions or situations that occur. The
person following these directions must use common sense, caution and care.
Product Reference & Illustration
When reference is made to brand name, product or specific tool, an equivalent product may be used in place of the referred to product. Substitute products used must have equivalent characteristics, including type, strength, and material. Incorrect substitution may result in product malfunction and possible injury to the operator and/or passengers.
All photographs and illustrations used may not necessarily depict actual models or equipment, but are intended only for reference. Specifications used are based on the latest product information available at the time of publication.
To The Installer
The parts in this kit are used for CR through CC 20 and 25 Evinrudeâ and Johnsonâ models. They will provide improved low speed running characteristics and adjustments.
This kit should be installed by a trained service technician using current technical literature.
These instructions are not intended for consumer use.
Important: Give these instructions to the owner. They contain important servicing information for the product.
This kit provides the latest production parts as service replacements for your engine. These parts (carburetor and throttle cam) must be used together. For servicing information, refer to CE or newer Service Manual and Parts Catalog.